MICROWAVE  COMPONENTS SERVICE

WDG Modules 

go to pricelist   go  to homepage

WDG001:    2.5GHz to 10GHz multiplier 50mW output   (RELEASED)

WDG002    10GHz to 144MHz receive converter (RELEASED)

WDG003    144MHz to 10GHz transmit converter (RELEASED)

WDG004    10GHz 1dB NF HEMT Preamp (RELEASED)

WDG006    10GHz 300mW PA (60mW drive) (RELEASED)

WDG007    10GHz 1W PA (200mW drive) (RELEASED)

WDG008    75dB gain 144MHz wideband noise amplifier (RELEASED)

WDG009    2.4 to 12GHz multiplier 50mW output (for 24GHz systems) (RELEASED)

WDG010    2.3/2.4GHz transverter <1dB NF,   5mW output,  144MHz IF (needs external LO) (RELEASED)

WDG011    1.3GHz transverter <1dB NF,  10mW output,  144MHz IF (needs external LO) (RELEASED)

WDG012    2.3GHz predriver/filter (1mW in 5mW out) (DEVELOPMENT)

WDG013    High current negative voltage generator for high power GaAs FET PAs (RELEASED)

WDG014    2.3GHz PA 1W input,  10W output (BETA TEST)

WDG015    2.3GHz PA 5mW input, 1W output (RELEASED)

WDG016    Surface mount LO (for 1.3 and 2.3GHz transverters etc), will replace DDK001 (BETA TEST)

WDG017    1.3GHz  PA 1W input, 18W output (BETA TEST)

WDG018    1.3GHz PA (Discontinued - May 2001)

WDG019    1.3GHz PA 1W input, 35W output (BETA TEST)

WDG020    1.3GHz transmit/receive relay, 0.3dB loss, 18W power handling (BETA TEST)

WDG021    Surface mount LO (for 10/24GHz transverters etc), will replace DDK004 (BETA TEST)

WDG022    1.3GHz branched arm splitter/combiner (up to 40W power handling) (DEVELOPMENT)

WDG023    1.3GHz branched arm splitter/combiner (up to 80W power handling) (DEVELOPMENT)

WDG024    1.3GHz branched arm splitter/combiner (up to 150W power handling) (DEVELOPMENT)

WDG025    2.3GHz HEMT preamp, <0.5dB NF (BETA TEST)

WDG026    1.3GHz HEMT preamp, <0.5dB NF (BETA TEST)

WDG027    432MHz transverter, 100mW output, 1dB NF, 28MHz IF (DEVELOPMENT)

WDG028    LO for WDG027 (5mW at 404MHz) (DEVELOPMENT)

WDG029    432MHz PA (100mW input, 10W output) (DEVELOPMENT)

WDG030    1.7GHz HEMT preamp for Meteosat, <0.5dB NF (BETA TEST)

WDG031    1.7GHz to 137MHz RX Converter for Meteosat, with on-board LO (DEVELOPMENT)

WDG040     2.4GHz to 144MHz  Converter for AO-40, with on-board LO (RELEASED)

Some products have been discontinued since this list was compiled - please check the pricelist for what is currently available